Using a miter saw is not difficult as you might think, but to get clean and accurately trimming boards you will have to learn how to maximize your miter saw- turn to your saw into a precision cutting tool.
Miter saws help you do a lot more than simply cut boards to same length. A miter saw recommend by lots of woodworkers because the blade can tilt left and right, which allows you to cut two different angled cuts at the same time. The sliding compound miter saw (Reviews from MITERSAWBUZZ) is as close to a TM tool, to make the saw more compact and easier to use.
Once you’ve started using your chosen miter saw its critical that you keep it in good condition otherwise the saws lifetime will be significantly reduced, resulting in waste of resources and money. Reducing friction is one of the key roles in keeping your miter saw healthy, the best way to achieve this is by regularly adding lubricant to any moving parts of the saw, particularly the hinge that holds the saw back, the miter, bevel and even the safety guard. One of the most effective lubricants to use is turbine oil although you only need to use a couple of drops.
Regular cleaning will also play a big part in extending the saws lifeline firstly, by removing dust and debris as often as possible. This task can be made easier by using compressed air and brushes. Whilst the brushes are best used for ensuring the teeth of the blade are clear, and moving the majority of the debris, the compressed air will remove anything that gets jammed in hard to reach areas.
Whether you are using your miter saw for the first time since opening the box or for the first time that day, its recommended that you always check the alignment and surface level you are working on. You can assess the surface by simply placing a level on a few different spots to ensure an accurate reading.
Miter saw fences can also be pushed askew over time. Newer models of miter saws include level table bases which are exceptionally solid and give a working stage. Be that as it may, you shouldn’t believe this stage to be level and exact until you have tried it for yourself. The miter angle and bevel alignment should be set at 0 degrees and be squared to the table. Safely bring down the saw to its lowest position then set the square between the saws back fence and the side of the blades edge. Any uneven gaps will indicate that the miter saw knob needs adjusting until it is direct and squared to the fence. Inevitably it is best to test the saw on some scrap pieces first to determine the correct settings before working on your project.
If you’ll be moving the saw around your workshop, consider a lighter saw. It will be fairly flexible to use. Of course, lighter saw has limited features to handle large and heavy wood types.